FILTER VS. WATER PURIFIER: WHAT’S THE DIFFERENCE?

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on telegram
Share on whatsapp
Share on email

Blog provided by 3f UL Gear apologies for any Chinglish and poor translation. We will aim to redo this in our own words in the future. 

Many people asked me whether seam-seal the Lanshan tent with silicone glue is a must. My answer is that it depends on the situation. If you buy a non-PRO version, you don’t need to apply glue, because it has been taped in the factory and has the high-performance waterproof ability. If you buy the PRO version which is made by 2 side silicone coated Nylon, Congratulations, you will get a new skill!

This method works for any silicone ultralight tent. Not limited to Lanshan tent.

You can find something like a syringe in the package go from the Lanshan Pro, which is the best gluing tool for ordinary people we can find. Although it does not necessarily have the simplest operation, but the result must be the nicest looking.

 

This is a reliable glue. Although it doesn’t dry fast, it’s easy to buy. If you have a better choice, please tell us and we will recommend it to other hikers.

 

In this official instruction of glue, the way they apply glue is to use a small brush to smear the seam, which is also done by most people, but we do not recommend this method because it is very difficult to operate, in the end your beautiful tent will become like this:

believe it will ruin your good mood all day and curse our tent.

 

Our suggestion is to use the syringe we sent with the tent. The specific operation method is shown in the video below:

 

Sorry its chinese! but you will get the drift. English Version just below.

 

 

In English

First of all, you should set up the tent in your backyard. It must be full pitched and tighten.

After that, squeeze the glue into the syringe. According to experience, if your handicraft is good, half a tube of glue is enough. We don’t recommend applying a lot of glue, because it will increase the tent weight.

Before sealing, firstly is to make sure where need sealing. The positions that must be sealing marked with red, the optional sealing area marked with yellow, and the area that no need seam sealing showing as black. We do not recommend seal all seams, because that will increase the weight.

The operation can be carried out from top to bottom. Hold the syringe in one hand, the other hand hold waist for stability. Apply the glue evenly along the seam. In the black UHMWPE patch area, apply it with your fingers after coating to form a thin layer of glue. Remember wipe your finger with papers after that.

If you are a DIYer, it not a big thing! If not, this DIY experience will open up a new world for you.

 

After all seams are sealed, don’t hurry to package the tent. According to the performance of different glue, you need to let it dry for 1-12 hours.

 

In conclusion, If you feel that you are not good at DIY or a perfectionist, you can choose to seal only the red area, so that Lanshan Pro can also withstand in the storm.

 

Finally, if you have a better seam sealing method, please tell us to benefit more people.

WHAT’S THE DIFFERENCE BETWEEN A BACKPACKING WATER FILTER AND WATER PURIFIER? (MSR BLOG)

Put simply, the main difference lies in the level of protection these two treatment devices provide against the harmful microorganisms that may be lurking in backcountry water sources. Generally speaking, a water filter is designed to remove waterborne protozoa and bacteria, but not viruses. A water purifier is designed to remove protozoa, bacteria and viruses, offering a higher level of defence.

WHY THE TWO TREATMENT DEVICE OPTIONS?

Traditionally, tackling viruses has been tough for water treatment devices. On the microscopic scale, viruses are far smaller than protozoa and bacteria. Because of this, they’re too small for backpacking filters to catch; they simply slip through the filter media that filters use.

Until recently, UV light, chemical treatments or boiling your water were required to deactivate viruses by scrambling their DNA. Now, however, advancements in mechanical pump purifiers mean you have a convenient way to physically remove viruses along with bacteria and protozoa, all in one easy step.

While pump purifiers and other purifying agents are great when you need them, a purifier isn’t always considered necessary on every trip. Let’s take a look at why.

(Please note, the COVID-19 virus has not been detected in drinking water supplies, according to the World Health Organization. Municipal systems readily tackle waterborne pathogens in their treatment methods.)

Guardian-hero

WHEN SHOULD I USE A BACKPACKING WATER FILTER?

While purifiers offer greater defense than microfilters, they may be considered a bit overkill for some types of trips.

If you’re traveling in the backcountries of the U.S. and Canada, a filter is typically considered sufficient protection. In these pristine landscapes, where human traffic is relatively low, the main threats are considered to be protozoa (like Cryptosporidium and Giardia), and bacteria (like E. coli and Salmonella). These microorganisms can be transferred to you through human or animal fecal matter in the water.

Viruses, in contrast, are, most often, species-specific. That means, viruses that are harmful to humans are transferred primarily by the fecal matter of other humans. Therefore, where fewer humans exist, we assume the risk of viruses is also lower.

Water filter vs. Water purifier

It is important to ensure that your microfilter is built to handle backcountry-type water. Some filters in outdoor shops are designed to remove only unpleasant tastes from tap water. Backcountry-grade microfilters are designed to remove contaminants down to 0.2 microns and should meet NSF protocol p231 and/or the U.S. EPA’s Guide Standard and Protocol for Testing Microbiological Purifiers (for removal of bacteria and protozoa). Learn about these testing standards here.

 

WHEN SHOULD I USE A BACKPACKING WATER PURIFIER?

If you’re traveling to less-developed countries, where water treatment and sanitation infrastructure is poor, a water purifier is the safer option. You might also choose a purifier in your local backcountry zones if you notice that people aren’t practising good hygiene near water supplies—such as at popular lakes.

Common waterborne viruses found in water sources include Norovirus and Hepatitis A.

If you own a microfilter, you can combat viruses by adding a purifying agent to the water after you’ve sufficiently filtered it of protozoa, bacteria and any particulate, like dirt. Chemical tablets make a great back-up purifier to any microfilter, rendering the water safe to drink of viruses.

Msr aquatabs

Using a purifying agent, like chemical tablets or UV light, alone won’t remove particles like dirt from the water. It’s important to note that particulate in the water can impede the effectiveness of UV light and to a lesser degree, chemicals.

This is why mechanical pump purifiers offer a big advantage!

Mechanical purifiers are designed to physically remove contaminants down to 0.02 microns (notice the extra zero in front of the 2). All mechanical purifiers should meet the NSF Protocol P231, NSF Protocol P248, or EPA drinking water testing standards.

As our local backcountries see a rise in traffic, and the risk of viruses increases with it, purifiers may become the more popular tools of choice.

Water filter vs. Water purifier

THREE USE SCENARIOS TO CONSIDER:

Here are a few scenarios that you might find yourself in while adventuring and the type of treatment device we recommend.

BACKPACKING IN WASHINGTON’S NORTH CASCADES NATIONAL PARK:

You’ll be collecting water from subalpine streams and lakes along established hiking trails during the summer. Any pathogenic risks in the water will come from humans and animals, but are usually light in concentration. Here, bacteria and protozoa are the primary threats; the likelihood of encountering viruses is very low. The water may also contain particulate like dirt or sediment, which will need to be removed.

Treatment choice: A microfilter is typically recommended, but you might bring a purifying agent as a backup if you suspect viruses could contaminate the water.

CAMPING ON A HOLIDAY WEEKEND AT VERY POPULAR LOWLAND LAKE:

You’ll be collecting water from the lake, the shores of which are packed with campers. The higher concentration of humans leads to a higher risk of viruses. The water also contains particulates, which you’ll want to remove.

Treatment choice: A mechanical pump purifier, or microfilter plus purifying agent.

 

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on telegram
Share on whatsapp
Share on email